Lessons I Learned From Info About How To Clean Pistol

Slide it back and forth several times through the bore of the barrel until it is thoroughly scrubbed.

How to clean pistol. Work in a well ventilated area that's been prepared for gun cleaning. To guarantee the barrel is thoroughly cleaned, repeat this procedure once thrice. Put solvent on the brush.

Using a properly fitted brass brush dipped in gun cleaning solvent, remove excessive firing residue from the bore and chamber. Apply solvent to a patch and clean the inside and outside surfaces of the slide with hands. Avoid the hand grips as.

The video features a glock 19 pistol, but you can use these basic instructions for nearly any moder. Grab a nylon or a copper brush and scrub at the slide or bolt to loosen any dirt or debris in or on the parts. Rub down the entire exterior of the gun with a small amount of gun oil.

Just like you did in the previous steps, clean with patches until there is. For revolvers where you have to clean from the muzzle end, use a brass or aluminum rod. Clean the barrel affix the bore brush to the cleaning rod.

Try working from the back of the bore if. Up to 1% cash back step 5: Don’t use steel cleaning rods.

Finish the bore cleaning process by. This means, dropping the magazine and racking. Clean the barrel with patches and a cleaning rod.